Aguilar

OBP-1

Preamp OBP1AGUILAR OBP-1 - € 119,00 NEW

The OBP-1's boost-only design gives you the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1's discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic headroom and low in noise.

Specs:
All FET design
Two bands of boost
Maximum amount of boost: 18db, occuring at 40 Hz for the bass, and 4kHz for the treble.
Input impedance: 1 meg ohm
Output impedance: 600 ohm
Dimensions: 0.98W" x 0.98L" x 0.59D"

SKU obp-1
€119.00
(Incl. 19% tax)
4 In Stock


 

OBP-2

Preamp OBP2AGUILAR OBP-2 - € 129,00 NEW

The OBP-2 was designed to give bassists fat tone while being small enough to fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix.

Specs:
Bass control: plus/minus 18 dB @ 40 Hz.
Treble control: plus/minus 16 dB @ 6.5 KHz.
Input impedance: 1 meg ohm
Output impedance: 100 ohm 9 or 18 volts operation. Additional 6dB with 18 volts.
Distortion: .019 into 10k ohm load
Noise: -95 dBm unweighted.
Battery life: 324 hours
Wire lead length: 6.50 inches
Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available.
Dimensions: 0.98"W x 0.98"L x 0.59"D

SKU obp-2
€129.00
(Incl. 19% tax)
3 In Stock


 

OBP-3

Preamp OBP3AGUILAR OBP-3 - € 139,00 NEW

The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a push/pull pot, mini-toggle or internal dip-switch for midrange frequency selection.

Specs:
Bass control:
plus/minus 18 dB @ 40 Hz.
Mid control: plus/minus 16 dB @ 400Hz or 800 Hz. User selectable frequency center.
Treble control: plus/minus 16 dB @ 6.5 KHz.
Input impedance: 1 meg ohm
Output impedance: 100 ohm 9 or 18 volts operation. Additional 6dB with 18 volts.
Distortion: .019 into 10k ohm load
Noise: -95 dBm unweighted.
Battery life: 324 hours
Wire lead length: 6.50 inches
Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available.
Dimensions: 0.98"W x 0.98"L x 0.59"D

SKU obp-3
€139.00
(Incl. 19% tax)
4 In Stock


 

Business Partners Wanted!

Public Peace is looking for partners in different countries interested in selling our products. If you feel adressed, just get in contact with Adrian Maruszczyk:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Login

Login