ToneStyler

Duo Six

ToneStyler BassTen
STELLARTONE ToneStyler  'Duo Six' - € 180,00 NEW

The latest refinement in Stellartone's unique two-channel two-cable ToneStylers.  The multi-range, multi-purpose 2021 DUO SIX offers musicians a choice between four contrasting capacitance ranges during the easy drop-in installation.

For use in guitars and basses featuring two pickup volumes but space for only one master tone control (Fender Jazz Bass, Gretsch), simply connect one cable to each pickup output. The blue cable's .047µF range controls the neck pickup, and the red cable's .022µF range controls the bridge pickup.

For use in guitars and basses with only one master volume control (Fender Precision Bass, Telecaster) connect only one cable to the volume pot to access the traditional .022µF or .047µF tone pot ranges.  To increase the EQ range to .069µF sub-bass, connect both cables in parallel.  To decrease to .015µF for mid-range-only EQ, connect both cables in series.  You may also connect one cable to each pickup output, producing two complementary EQ ranges.

There are five contrasting capacitance circuits in each of the four available EQ ranges, with uniform audio-taper spacing between tones.  At full clockwise rotation, the installer's option of true bypass or virtual tone pot loading is selected.

New features for 2021:  Within these traditional tone pot capacitor ranges, the dual circuits have been precisely re-voiced from bright to dark, in five complementary audio-taper tone steps.   This refinement now allows both cables to be connected together in parallel to create a single-circuit ToneStyler SUB-BASS control, ranging way down to .069µF… or alternately, connected together in series to create a single-circuit ToneStyler MID-RANGE control, adjusting down to only .015µF.  These two optional EQ ranges enjoy the same uniform audio-taper tone spacing per step, as when only one cable is used.

The DUO SIX is 100% compatible with passive high-impedance pickup basses & guitars, with three-knob "volume-volume-tone" controls, such as Fender's J-Bass and most Gretsch models.  Use ONE Duo Six per TWO volume controls.

Alternately, the DUO SIX may be installed in a single-volume-knob bass or guitar, such as Fender’s P-Bass and Telecaster.  By connecting one or both cables to the volume pot, the installer’s choice between four contrasting tone ranges is easily made:   .069µF  .047µF   .022µF  or  .015µF.  This versatility allows one DUO SIX to be shared and transferred within a variety of guitars and basses with many different control plans, as may be required for recording or live performances.

1/4" solid "D-flat" tip fits ONLY 1/4” hole USA set-screw knobs… NOT PUSH-ON OR METRIC KNOBS!   3/8”-32 dia. x 5/16" length USA bushing mounts thru surfaces up to 3/16” thick, such as metal control plates, pickguards, and typical solid-wood & laminated-top thicknesses.  Compact polymer module with 0.875" dia. and 0.8125" behind-panel depth (±5%) allows an easy drop-in swap for a standard tone pot, with no fitting or modification required.  100% passive analog circuity - no batteries - zero noise!  Made in U.S.A.

Installation

SKU ST_DuoSix
€180.00
(Incl. 19% tax)
8 In Stock


 

 

Bass Ten

ToneStyler BassTen
STELLARTONE ToneStyler 'Bass Ten' - € 170,00 NEW

The BASS TEN is a ten-position control featuring one "tone pot loading circuit" in switch position #9 (adjacent to TRUE BYPASS). This EQ position exactly duplicates the subtle loading and treble reduction of a standard 250k ohm bass tone pot with a .047µF tone capacitor, when turned to maximum clockwise brightness. Range: TRUE BYPASS to .100µF.

- Ten circuit positions: true bypass, 250kohm+.047uF tone pot loading, plus eight ToneStyler EQ contours
- .100uF max capacitance
- 24-fine-splined-solid multi-use tip fits USA push-on knobs, 6mm hole & 1/4” hole set-screw knobs
- 3/8”-32 dia. x 1/2” MID-length USA bushing mounts thru all surfaces up to 3/8” thick
- Compact polymer module: 0.875" dia. x 0.825" behind-panel depth
- For passive high-impedance pickup basses with two "volume-tone" knobs (Tele, P-Bass), or four "volume-tone-volume-tone" knobs (Rickenbacker)
- Use one per volume control

Installation

SKU ST_BassTen
€170.00
(Incl. 19% tax)
Out of stock


 

 

Guitar Ten

ToneStyler GuitarTen
STELLARTONE ToneStyler 'Guitar Ten' - € 170,00 NEW

The GUITAR TEN is a ten-position control featuring one "tone pot loading circuit" in switch position #9 (adjacent to TRUE BYPASS). This EQ position exactly duplicates the subtle loading and treble reduction of a standard 500k ohm guitar tone pot with a .022µF tone capacitor, when turned to maximum clockwise brightness. Range: TRUE BYPASS to .022µF.

- Ten circuit positions: true bypass, 500kohm+.022uF tone pot loading, plus eight ToneStyler EQ contours
- .022uF max capacitance
- 24-fine-splined-solid multi-use tip fits USA push-on knobs, 6mm hole & 1/4” hole set-screw knobs
- 3/8”-32 dia. x 1/2” MID-length USA bushing mounts thru all surfaces up to 3/8” thick
- Compact polymer module: 0.875" dia. x 0.825" behind-panel depth
- For passive high-impedance pickup guitars with two "volume-tone" knobs (Tele), three "volume-tone-tone" knobs (Strat), or four "volume-tone-volume-tone" knobs (Gibson)
- Use one per volume control

Installation

SKU ST_GuitarTen
€170.00
(Incl. 19% tax)
2 In Stock


 

 

Triple Six

ToneStyler TripleSix
STELLARTONE ToneStyler 'Triple Six' - € 150,00 NEW

The TRIPLE SIX is a six-position multi-use control, offering players the choice between three maximum capacitance ranges during installation. Starting from TRUE BYPASS (clockwise), choose .022µF GUITAR, .047µF BASS, or .069µF SUB-BASS as your maximum (counter-clockwise) EQ range when connecting our multi-wire shielded cable. Swap your tone pot with a ToneStyler TRIPLE SIX, listen to all three options... then decide how deep or how warm to configure your tone range.

- Six positions, notched rotation
- 24-fine-spline multi-use tip fits USA push-on knobs, plus 6mm & 1/4” set-screw knobs
- 3/8”-32 diameter x 1/2” MID-length USA bushing mounts through all surfaces up to 3/8” thick
- Compact polymer module: 0.875" dia. x 0.825" behind-panel depth
- Choose between three maximum capacitance ranges during installation: .022µF guitar, .047µF bass, or .069µF sub-bass
- Replaces standard tone pot
- For passive high-impedance pickup guitars and basses with two "volume-tone" knobs (Tele, P-Bass), three "volume-tone-tone" knobs (Strat), or four "volume-tone-volume-tone" knobs (Gibson, Rickenbacker)

Installation

SKU ST_TripleSix
€150.00
(Incl. 19% tax)
2 In Stock


 

 

Business Partners Wanted!

Public Peace is looking for partners in different countries interested in selling our products. If you feel adressed, just get in contact with Adrian Maruszczyk:
This email address is being protected from spambots. You need JavaScript enabled to view it.