Tascam US-16x08

Tascam US 16x08
TASCAM US-16x08 - € 319,00 NEW

The US-16x08 offers 16 mic and line inputs for your computer with clear sound quality and advanced features to manage big sessions. Eight Ultra-HDDA microphone preamps provide clean and quiet operation while delivering up to 56 dB of gain. An additional eight balanced line inputs are provided, two of them switchable to instrument level for direct guitar or bass recording. Eight balanced line outputs are also available, two with a level control on the front panel for monitoring.

Built into the US-16x08 is a DSP Mixer for low-latency digital mixing. Each channel has four-band EQ and compression for polished-sounding monitor mixes. In addition to interface mode, the US-16x08 can be used as a standalone mic preamp. Windows and Mac drivers are provided, as well as USB Class Compliant 2.0 drivers for tablets like the Apple iPad. MIDI input and output are also available on the rear panel.

Whether using the ergonomically-designed angled desktop stand or mounting with the included rack ears, the US-16x08 includes enough I/O for almost any music recording application.

  • - High-quality Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amps with ultra-low noise (EIN: –125 dBu)
  • - Recording at up to 96kHz/24-bit
  • - Support for Mac and Windows operating systems
  • - 16-in/8-out audio streaming from a PC connected via USB 2.0
  • - Selectable operation mode between audio interface and standalone mic preamp
  • - On-board DSP mixer for monitoring
  • - Low-latency monitoring via the DSP Mixer
  • - Compressor and 4-band EQ for each input channel on the DSP mixer
  • - Eight XLR inputs with phantom power
  • - Two TRS (balanced) inputs selectable between line and instrument level
  • - Six TRS (balanced) inputs on rear panel
  • - Eight TRS (balanced) analogue outputs
  • - Standard headphones output
  • - MIDI input/output
  • - USB Audio Compliance 2.0 for iOS connection
  • - DAW compatibility (ProTools, Cubase, Live, Studio One, Garage Band)
  • - Rack-mount adapter included

More Information

SKU Tascam_US-16x08
(Incl. 19% tax)
Out of stock


Tascam US-4x4 HR

Tascam US 4x4HR
TASCAM US-4x4 HR - € 239,00 NEW

When two audio channels are not enough

The four-channel US-4x4HR is a member of the Tascam US-HR series of high-resolution USB audio interfaces and an enhanced version of the popular Tascam US-4x4. It provides four mic/line inputs, two of which can alternatively be used for direct input of a guitar or bass, four balanced line outputs, two headphones connectors, and MIDI I/O to your Windows or Mac computer or your iPhone or iPad*. This interface is ideal for multitrack recording of two instruments and two vocalists, for instance, or multi-media production with high demands on simple operation and studio-quality sound. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for two-channel podcast creation and live streaming.

Lower noise and distortion – better sound than ever

The versatile US-4x4HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing stunning audio right away.

  • - Ultra-low-noise mic preamps achieve −128 dBu EIN (Equivalent Input Noise)
  • - XLR/TRS jacks allow the input of condenser mics and the balanced connection of synthesizers and other equipment
  • - Wide gain range ensures sufficient level even with dynamic microphones
  • - Guitars can be directly connected enabling the use of 3rd-party plug-in effects

More Information

SKU Tascam_US-4x4_HR
(Incl. 19% tax)
1 In Stock



ESI UGM192 2ESI UGM192 - €119,00 NEW

Extremely portable solution for microphone and guitar recording!

UGM192 is an ultra mobile guitar and microphone to USB audio interface with excellent 24-bit / 192kHz / 114dB quality.

This compact device allows you to connect an electric guitar via its Hi-Z instrument input and a professional dynamic or condenser microphone directly to your PC or Mac or to many compatible mobile devices such as smart phones and tablet computers that support USB audio. The rear panel offers a stereo output that you can use for playback and for realtime input monitoring, i.e. with headphones.

This makes UGM192 the perfect companion for guitar and professional microphone recording applications on the road or in your studio. You can use it to jam with a guitar and microphone, process the signal in realtime and listen to the mix directly via headphones - no special additional devices are needed: you simply plug UGM192 between your guitar, headphones, the microphone and your computer or mobile device. As a truly mobile solution, it can even be powered via an optional external battery - just bring this professional preamp anywhere you go!

  • - USB 3.1 audio interface with USB-C connector (cable included)
    - USB 2.0 compatible (cable included)
    - USB bus powered
    - separate power connector for optional use (microUSB)
    - professional microphone preamp with balanced 1/4" TRS connector
    - switchable 48V phantom power support
    - professional Hi-Z instrument input with unbalanced 1/4" TS connector
    - line / headphone output with 1/4" stereo TRS connector
    - 24-bit / 192kHz AD converter (114dB dynamic range A-weighted)
    - 24-bit / 192kHz DA converter (114dB dynamic range A-weighted)
    - 100% class compliant
    - works with OS X / mac OS (10.9 and above) with native CoreAudio support (32-bit and 64-bit)
    - EWDM driver for Windows 7 / 8 / 8.1 / 10 with ASIO 2.0, MME, WDM and DirectSound (32-bit and 64-bit)
    - DirectWIRE support under Windows with virtual audio channels for internal loopback recording
    - dimensions aprox. 87mm x 67mm

SKU esiugm192
(Incl. 19% tax)
1 In Stock


Gigaport eX

ESI Gigaport eX
ESI Gigaport eX 2ESI Gigaport eX - €165,00 NEW

Professional 24-bit / 192 kHz 8 Output USB Audio Interface!

GIGAPORT eX is not like any other USB audio interface ... it's simply the multichannel playback solution with the best price value ratio on the market due to its unique set of features providing 8 independent outputs (and full 7.1 surround sound support), 2 independent stereo headphone outputs and excellent audio quality supporting up to 24-bit and 192 kHz.

The upgrade of our famous GIGAPORT HD+ provides ASIO 2.0 drivers for professional audio mixing and playback under Windows 7, Windows 8.1 and Windows 10. The hardware is also CoreAudio compatible and natively works under OS X / macOS even without the installation of a special driver.

This makes GIGAPORT eX perfect for digital DJs on the road working with notebook computers. Simply use your favorite DJ software and the eight outputs as up to 4 different stereo channels, enabling you to mix, cue and add effects! Monitor and pre-listen to your signals via the two built-in headphone outputs. GIGAPORT eX of course also works on your desktop computer and is compatible with all important professional audio DAW software applications. The hardware also works with consumer programs such as DVD playback software.

  • - USB 3.1 Audio Interface with USB-C connector (different connection cables included)
    - USB 2.0 compatible
    - 24-bit / 192 kHz D/A converter with 114dB dynamic range (A-weighted), available on all output channels
    - 8 independent output channels with -10dBV RCA connectors
    - 2 independent stereo headphone outputs: 1st output sends l out mixed signal of all playback channels, 2nd output l sends out different signal from playback channel 1/2
    - compatible with Windows 7 / 8.1 / 10 and OS X / macOS
    - supports ASIO 2.0, WDM, MME with our EWDM drivers as well as CoreAudio
    - 100% class compliant
    - works with OS X / mac OS (10.9 and above) with native CoreAudio support (32-bit and 64-bit)
    - EWDM driver for Windows 7 / 8 / 8.1 / 10 with ASIO 2.0, MME, WDM and DirectSound (32-bit and 64-bit)
    - DirectWIRE Loopback support under OS X / mac OS / Windows
    - DirectWIRE Output Channels support under Windows for dynamic output routing
    - compact and portable design with around 12 cm x 7 cm x 2 cm

SKU esigigaportex
(Incl. 19% tax)
1 In Stock


M4U eX

ESI M4UEXESI M4U eX - €138,00 NEW

High Performance USB 3.0 MIDI with automatic I/O detection!

M4U eX is a compact and yet extremely powerful USB 3.0 MIDI interface with 8 MIDI ports.

Each of the 8 ports can either be used as a MIDI input or as a MIDI output, replacing not only traditional MIDI interfaces like it's popular predecessor models with 4 inputs and 4 outputs, but providing also other possible configurations. For instance, you can use up to 8 outputs at a time or up to 8 inputs, or 6 outputs and 2 inputs - to name some examples. And the best feature? This is all handled automatically, simply based on your connection to other MIDI inputs or MIDI outputs and each automatic input / output configuration is displayed via colored LEDs on the front panel.

M4U eX is not only one of the worlds first USB 3.0 MIDI interfaces, it also includes a USB 3.0 hub with 3 connectors for other USB equipment like software dongles or USB keyboards and others. This can literally turn this device into the central hub for your MIDI and USB musical instrument devices. The class compliant device can be bus powered or if needed for other USB devices, be powered by the included DC power supply.

The Windows 7 / 8.1 / 10 and macOS compatible device provides not only perfect timing and the highest low latency performance of any MIDI interface in it's class on the market today, it can even be used fully standalone without a computer: different operation modes allow you to route input to output signals, merge MIDI signals or use M4U eX as a MIDI thru box. These modes can be selected with the push of a button when needed.

If the 8 ports are not enough, you can connect multiple units to the computer at one time - plus there is also the larger M8U eX available, with 16 port.


  • - USB 3.0 MIDI interface
  • - 100% class compliant, works without the installation of a driver
  • - USB bus powered
  • - 8 MIDI ports, 4 on the front and 4 on the back
  • - automatic input and output detection, each port works as a MIDI input or MIDI output
  • - standalone operation possible
  • - can be used as MIDI Thru box in standalone mode to send one MIDI signal to 7 outputs
  • - can be used as MIDI merger in standalone mode to merge 7 MIDI signals to a single output
  • - 3-port USB 3.0 hub with external 5V DC power supply to power USB devices (power supply included)
  • - multiple units can be used with one computer at a time
  • - downwards compatible to USB 2.0 with a USB 2.0 legacy mode
  • - optional ESI MIDI Port driver for multi device / multi client operation under Windows available
  • - dimensions roughly 17.5cm x 12.0cm x 4.5cm

SKU esim4uex
(Incl. 19% tax)
1 In Stock



mocoESI MoCo - €68,00 NEW

Passive Monitor Controller with 2 stereo I/O!

MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.

"Fully passive" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4" TRS connectors, one with both unbalanced RCA and unbalanced 1/8" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4" TRS plus unbalanced 1/8" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!

Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.

  • - 2x mono balanced 1/4" TRS input (input A)
    - 2x mono unbalanced RCA input (input B)
    - 1x stereo unbalanced 1/8" mini jack input (input B)
    - 2x mono balanced XLR output (output A)
    - 2x mono balanced / unbalanced 1/4" TRS output (output B)
    - 1x stereo unbalanced 1/8" mini jack output (output B)
    - selected high quality potentiometer for passive volume control
    - A/B input selection switch
    - L/R switch to swap left & right audio channels
    - independent A and B buttons to enable and disable the outputs
    - mono downmix button (mixes left to right channel and right to left channel)
    - mute button to mute output signal instantly

SKU esimoco
(Incl. 19% tax)
2 In Stock


U22 XT

 ESI U22 XTESI U22 XT - €89,00 NEW

Professional 24-bit USB Audio Interface!

U22 XT offers a maximum of flexibility as fully bus powered USB device with pristine professional 24-bit audio quality.

The interface features 2 analog input and 2 analog output channels with RCA line inputs, a microphone preamplifier with XLR input and support for +48V phantom power, a Hi-Z instrument input for guitars, a high quality headphone output and TRS line outputs. Master and headphone volume as well as monitoring are controlled on the front panel.

On the software side, U22 XT provides low latency drivers with support for WDM, ASIO 2.0 and CoreAudio based on our EWDM and DirectWIRE technology.

Included with U22 XT is the Bitwig Studio 8-Track software, the trim and effective digital audio workstation to start producing, performing, and designing audio like a pro. With Bitwig Studio 8-Track, you can start working right out of the box without other additional software. Record and arrange, improvise and perform, or do it all at once, with this professional solution developed by musicians, for musicians.

If you're looking for a really powerful USB audio solution for your PC or Mac to start working out of the box, then U22 XT is for you!

  • - 2 input / 2 output 24-bit / 96kHz USB 2.0 24-bit Audio Interface
  • - microphone preamp with +48V phantom power support
  • - Hi-Z instrument input with 1/4" connector
  • - USB bus powered
  • - max. 24bit/96kHz
  • - line input with RCA connectors
  • - line output with balanced 1/4" TRS connectors
  • - headphone output with 1/4" connector
  • - ADC with 102dB(a) dynamic range
  • - DAC with 108dB(a) dynamic range
  • - input / output monitoring controlled on front panel
  • - master volume control on front panel
  • - supports Windows Vista, Windows 7, Windows 8.1 and Windows 10 with ASIO 2.0, MME, WDM and DirectSound incl. DirectWIRE support
  • - supports Mac OS X (10.7 and above) via the native CoreAudio USB audio driver from Apple (no driver install required)
  • - supports many Linux distributions via the ALSA USB audio class support
  • - includes license of Deckadance LE from Stanton
  • - includes Bitwig Studio 8-Track digital audio workstation software
  • - includes license of inTone 2 ESI Edition from Audified
  • - dimensions roughly 17.5cm x 12.0cm x 4.5cm

SKU esiu22xt
(Incl. 19% tax)
1 In Stock



 Fluid SRI 2



Featuring a robust aluminum chassis, the SRI-2 interface is a sturdy piece of gear reminiscent of the “old school” studios.  Along with the striking design comes exceptional 21st century audio quality and functionality.  Best-in-class digital converters capture the detailed nuance of every recording.  The large volume knob provides accurate control of the output level, and direct monitoring provides zero-latency tracking.  The 2 XLR/TRS combo inputs are conveniently mounted on the front of the SRI-2, so you can easily plug in your instrument or mic.  The truly unique innovation of the SRI-2, however, is the speaker switching capability, which allows you to A-B your mix on two sets of speakers (with one of them hopefully being from Fluid Audio).

  • - Anodized aluminum chassis housing and master volume knob
    - Professional grade 24-bit/192kHz digital conversion
    - 2 class A microphone preamps with +48 V phantom power
    - 2 x XLR/TRS combo inputs on the front panel for Line / Mic / Instrument recording
    - 4 TRS outputs, for 2 monitor pairs with A / B button
    - 1 headphone output with separate volume control, 2 x 75mW
    - LED indicators on all knobs
    - Powered by USB 2.0 connection
    - Cubase LE DAW software included via download for PC and Mac
    - Cubasis LE DAW for iPad (IOS 9 and later)
    - OS support: OSX 10.6.4 and newer, Windows 7/8/8.1 and Windows 10 x86/x64

SKU fasri-2
(Incl. 19% tax)
1 In Stock


GO: Livecast

Roland Go Livecast


BOSS GO: Livecast - €249,00 NEW

Pro Production for Smartphone Livestreaming!

Although it’s easy to stream live content with your smartphone, making your broadcasts look professional takes more effort. That’s why you need GO:LIVECAST, the simple and affordable way to bring superior production values to your webcasting. This hardware/app combo is a fully featured streaming studio that lets you mix sound, display titles, play media, trigger sound effects, and more—without needing a computer or costly dedicated A/V gear. With just the GO:LIVECAST hardware, companion app, and your smartphone, you have all the tools you need to present engaging live web shows that will rival the most advanced creators on social media.

Using GO:LIVECAST is quick and easy—just plug in your smartphone and connect earbuds or headphones for sound monitoring. A built-in mic is ready to capture high-quality sound, complete with onboard reverb if you like to sing. An external professional mic is also supported via the XLR input, and there’s even a stereo line input for plugging in a guitar preamp, synth, mixer, or other sound source.

The GO:LIVECAST app includes easy-to-use media tools that bring premium production values to your web shows. Create your own personalized libraries for music, sound effects, photos, and videos, or start creating with a variety of pre-installed options. Custom titles and text are also available, enhancing your productions even further. Media elements for different shows can be stored in Live Sets, all queued up and ready for when it’s time to go live.

The GO:LIVECAST app logs in to your accounts on Facebook Live, Twitch, YouTube, and other major streaming services. Just select a platform and tap to start webcasting! And as you livestream, comments from your viewers can be monitored via a scrolling window in the app.

Via a simple, customizable control layout, the GO:LIVECAST hardware lets you direct your live presentations and stay fully engaged with your audience. All it takes is a touch to start broadcasting, play music, display titles, launch photos and videos—or even trigger some applause at the end of the show! Knobs provide quick control of mic and media volumes, while the mic-mute button will keep coughs and unwanted sounds out of your livestream.

Select your smartphone’s front or rear camera within the app and add a skin filter, if needed, to soften the look. Portrait or landscape mode is automatically set by your phone’s positioning, while in-camera mirroring displays the proper left/right perspective to your audience. It’s even possible to connect a second smartphone camera over wi-fi, with one-touch switching and support for split-screen views.

- Dimensions (W x D x H): 107 x 138 x 53 mm
- Weight: 180g

SKU rolandgolivecast
(Incl. 19% tax)
1 In Stock



Yamaha AG06YAMAHA AG06 - € 149,00 NEW

Ready to share your musical creations with the world? AG is an ideal tool for fast and easy production of musical content for live streaming sites like YOUTUBE LIVE and USTREAM, online lessons in real time, or creating video or audio podcasts offline.The AG's studio-quality sound will give your content a professional edge to win over your audience and increase your fan-base. Since AG comes equipped with phantom power, you can connect a wide range of microphones including professional-level condenser mics. Andthe AG’s flexible Hi-Z input lets you connect a wide range of instruments like guitars, bass guitars and synthesizers.Equipped with studio-quality D-PRE mic preamps your AG will be able to capture the distinctive nuances of your vocal and instrumental performances with high-resolution sound. AG features 1-TOUCH DSP that utilizes Yamaha’s state-of-the-art signal processing technology. COMP/EQ will hone your tone while EFFECT adds ambient reverb, and AMP SIM delivers a classic, warm tube amp sound—all at the touch of a button. Compatible with Windows and MAC, AG DSP Controller gives you additional control of 1-TOUCH DSP parameters such as COMP, EQ, HPF, reverb, and the AMP SIM. EASY mode utilizes a simple intuitive interface while EXPERT mode gives users more detailed control. AG’s high-quality design enables 192kHz / 24bit sound that can reproduce even the most subtle nuances of your original recordings. If you useASIO compatible playback software, you can even bypass the internal Kernal mixer and reproduce the original sound faithfully.AG’s 192kHz/24bit sound quality is ideal for capturing the purest reproduction of your analog recordings when archiving your treasured collection.

More Information

SKU yamahaAG06
(Incl. 19% tax)
Out of stock


Business Partners Wanted!

Public Peace is looking for partners in different countries interested in selling our products. If you feel adressed, just get in contact with Adrian Maruszczyk:
This email address is being protected from spambots. You need JavaScript enabled to view it.